Micromachining of crosslinked PTFE by direct photo-etching using synchrotron radiation

Micromachining of crosslinked PTFE (polytetrafluoroethylene) using synchrotron radiation direct photo-etching method has been demonstrated. High aspect-ratio microfabrication was carried out. The etching rate of crosslinked PTFE was higher than that of non-crosslinked PTFE. Through the etching rate measurements of various samples, it was found that synchrotron radiation etching rate of crosslinked PTFE only depends on the degree of crosslinking, neither molecular weight nor crystallinity. The effect of molecular motion on etching process was discussed from temperature dependence data on etching rate. Furthermore, the surface region of synchrotron radiation irradiated sample was investigated by Fourier transform infrared spectroscopy and the experimental result showed that the modification induced by synchrotron radiation proceeded before desorption.     

ESR studies of photosensitized degradation of poly(L‐lactic acid) via photoionization of dopant

The photosensitized degradation of poly(L ‐lactic acid) (PLA) via an anionic reaction process was studied using spectrophotometry, electron spin resonance (ESR), and gel permeation chromatography (GPC) measurements. PLA film doped with N,N,N′,N′‐tetramethyl‐p‐phenylenediamine (TMPD) was irradiated at 77 K using UV light (λ_c = 356 nm) by which the PLA matrix itself cannot be directly excited. After photoirradiation, a new broad absorption band appeared over the original spectrum due to TMPD⁺ ·, which was produced by two‐photon ionization. The ESR spectrum of the irradiated sample indicated the presence of the TMPD⁺ · radical and main‐chain scission radical of PLA. During the thermal annealing at 0 °C, the latter radical changed to another radical species by dehydrogenation of the alpha hydrogen of the PLA main chain. TMPD⁺ · was extremely stable at room temperature for 7 d. However, by thermal annealing at 40 °C, all the radicals decayed due to the enhanced molecular motions near T_g of PLA (58.7 °C). Spectral simulation for the obtained ESR spectra revealed the relative amounts of four radicals: TMPD⁺ ·, a main‐chain scission radical, a main‐chain tertiary radical, and an unknown radical. The last one was tentatively assigned to the PLA radical anion because of its short decay time. GPC measurements clearly indicated a decrease in the molecular weight of PLA after irradiation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 706–714, 2001     

Synthesis,characterization, and enzymatic degradation of network aliphatic copolyesters

Network copolyesters were prepared from glycerol (Yg) and sebacic acid (10) with 10–90 mol % of either succinic acid (4), 1,12-dodecanedicarboxylic acid (14), 1,18-octadecanedicarboxylic acid (20), or terephthalic acid (T). Prepolymers prepared by melt-polycondensation were cast from dimethylformamide solution and postpolymerized at 230–250°C for various periods of time to form a network. The resultant films were transparent, flexible, and insoluble in organic solvents. The network copolyesters obtained were characterized by infrared absorption spectra, wide angle X-ray diffraction analysis, density measurement, thermomechanical analysis, differential scanning calorimetry, and tensile test. The enzymatic degradation was estimated by weight loss of the network copolyester films in a buffer solution with Rhizopus delemar lipase at 37°C. The weight loss due to the enzymatic degradation was decreased with increasing comonomer content, and the copolyesters with Yg4, Yg20 and YgT more than 50 mol % were not degraded by lipase enzyme at all. On the contrary, Yg-10/14 films were degraded appreciably over whole range of comonomer composition. With increasing comonomer content, the heat distortion temperature increased gradually, while the tensile strength and Young's modulus were not changed much. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2005–2011, 1999     

牙鲆群体Idh-1基因座位杂合型个体选择性优势

利用淀粉凝胶水平电泳法分析了人工牙鲆种苗群体的异柠檬酸脱氢酶同工酶 (IDH) .对牙鲆材料分析得知 Idh- 1基因座位只存在 A、B两个等位基因 ,而且在 2 3个样品群中 ,有 19个样品群呈现 A、B这两个等位基因所决定的基因型的杂合型个体过剩现象 ,表现出杂合基因型的选择性优势 .设定这 19个呈杂合型过剩样品群的死亡率为零 ,即以杂合型 A/ B的成活率为 10 0 %来计算其纯合型的成活率 ,得到纯合型个体 A/ A和 B/ B的成活率分别为 6 9.2 %和 75 .2 % ;从个体的标准体长上看 ,在表现为杂合型个体过剩的 19个样品群中 ,15个样品群的杂合型个体 (A/ B)大于纯合型个体 (B/ B) .其结果反映了牙鲆人工养殖放流群体的 Idh- 1的基因型与成活率及生长存在相关性 .     

Simulation of soil deformation and resistance at bar penetration by the Distinct Element Method

A mechanical model of soil is constructed using the Distinct Element Method (DEM) which makes it possible to analyze the discontinuous property of soil. To discuss the applicability of the soil model by the DEM, a bar penetration test was conducted and the result was compared with the simulation results. From the results of the behavior of elements, it could be said that the mechanical model by the DEM could well simulate the discontinuous behavior of soil and the parameters used in the simulation play important roles to make the soil model useful. As for the penetrating resistance, some problems which lie in the present DEM model are discussed and the key to solving these problems is indicated. Moreover, the method to determine the time interval used in the DEM simulations is mentioned in terms of the stability of the solution in the calculation.     

Heat of Reaction of the Hydrolysis-Polymerization Process of Tetraethyl Orthosilicate in Acidic Condition

Heat of reaction of the hydrolysis-polymerization process of tetraethyl orthosilicate with water in acidic condition was investigated to clarify the thermodynamic driving force of sol-gel reactions. Heat of reaction was measured using an isoperibol calorimeter by mixing a dilute tetraethyl orthosilicate (TEOS) ethanolic solution with another solution of water, ethanol, and hydrochloric acid. The temperature change of the reaction cell had been measured more than 24 hours after mixing under the quasi-isothermal condition. Large exothermic reaction (12.9 kJ·mol^–1 for 1 mole of TEOS) due to the hydrolysis of TEOS was observed. A slow exothermic reaction followed it, and after that, the sol-gel reaction was changed to a small endothermic one.